The properties listed on this page determine the levels of the delta values upon which the state machine determines to change a sensor from one state to the next. The state transition diagram is shown here as a reminder; for more information on the state machine see FIXME.

state transition diagram

releasedToApproachedThreshold

int32_t tlSensors.data[<n>].releasedToApproachedThreshold

If a sensor is in released state and the delta value is more than this threshold, the state is changed to releasedToApproached.

approachedToReleasedThreshold

int32_t tlSensors.data[<n>].approachedToReleasedThreshold

If a sensor is in appraoched state and the delta value is less than this threshold, the state is changed to approachedToReleased. This value should always be less than or equal to releasedToApproachedThreshold. Typically it is about 10% smaller.

approachedToPressedThreshold

int32_t tlSensors.data[<n>].approachedToPressedThreshold

If a sensor is in approached state and the delta value is more than this threshold, the state is changed to approachedToPressed. This value should always be larger than or equal to releasedToApproachedThreshold.

pressedToApproachedThreshold

int32_t tlSensors.data[<n>].pressedToApproachedThreshold

If a sensor is in pressed state and the delta value is less than this threshold, the state is changed to pressedToApproached. This value should always be less than or equal to approachedToPressedThreshold. Typically it is about 10% smaller.